SEBA Hydrometrie GmbH & Co. KG


61a Gewerbestrasse, D-87600,

Kaufbeuren
Germany

Company Profile

For more than 50 years the German company SEBA Hydrometrie GmbH & Co. KG offers high-standard measurement and monitoring systems for a wide range of requirements in the meteorology, hydrology, and hydrometry. Applications vary from groundwater, surface water, water quality, wastewater and water management.

Since its foundation in 1967, SEBA Hydrometrie has committed itself to both development and production of innovative products and offers a broad know how for complete measuring networks.

Highly developed sensors as well as robust and reliable data loggers correspond to the latest technology and provide secure data for continuous surveillance and controlling procedures. Our products meet highest demands concerning quality, ergonomics and service.

Company Product Catalog: www.seba-hydrometrie.com



Parameters


Products

DischargeApp

High-tech, low-cost and user-friendly technology for scalable discharge measurementsMeasure water level, surface velocity and discharge with a smartphone in less than a minuteSetup a measurement station in less than 1 hourCalculations are done in the smartphone with the DischargeApp, no internet coverage requiredError-free data transmission to the cloudIntuitive visualization, analysis and management using the DischargeWeb

  DischargeApp

SEBA MPS-TEC Multilevel-Conductivity-Chain

Robust, maintenance-free multiparameter probes (MPS) made of 1.4539 stainless steelMulti-level measurements of temperature (T) and electrical conductivity (EC)Slim design (Ø 22 mm) for observation wells down to 1“diameterAvailable with up to 7 conductivity segments and individual cable lengthsCompatible with all SEBA data logger (UnilogCom, LogCom, SlimlogCom...)Upgrade with pressure sensor for water level measurements

SEBA MPS-TEC Multilevel-Conductivity-Chain

Nitrate probe SPS-NO3

Robust and virtually maintenance-free single-parameter sensor (SPS) for measuring nitrate ( NO3- , NO3-N)Slim design (Ø 48.3 mm) for observation wells with minimum 3“diameterHigh measuring accuracy, drift-freeAvailable in different measuring ranges up to max. 0-266 mg/L NO3-Made of 1.4571 stainless steelOutput: RS485 (SHWP, Modbus RTU) to connect with SEBA data loggers

Nitrate probe SPS-NO3

Teledyne RD Instruments WinRiver II

Operating and configuration software for ADCP-products of Teledyne RD Instruments (StreamPro, RiverPro, RioGrande, RioPro, RiverRay)Available in several languages ??Data collection and analysis of speed / flow profiles in real time - configuration via "Measurement Wizard"Modes to customise the ADCP measuring device

Teledyne RD Instruments WinRiver II

Teledyne Ocean Science Q-Boat 1800

Modularly expandable with DGPS (e.g. Trimble), radio modem and echo sounder

Teledyne Ocean Science Q-Boat 1800

Teledyne Oceanscience Q-Boat 1250

Motorised, cost-efficient equipment rack with remote control for various ADCP sensors (StreamPro, RiverPro und RiverRay)Collapsible sliding crossbar and lightweight for easy handling and convenient transportation to and from the deployment siteModularly expandable with DGPS

Teledyne Oceanscience Q-Boat 1250

Teledyne Oceanscience High-Speed Riverboat

Robust and stable equipment rack for various ADCP sensors (StreamPro, RiverPro, RioPro/WHRG and RiverRay)The
state-of-the-art trimaran hull design cuts through surface waves,
strongly resists overturning, and maintains instrument orientation in
high flows conditions.Modularly expandable with DGPS and depth sounder

Teledyne Oceanscience High-Speed Riverboat

Teledyne Oceanscience Riverboat SP™

Robust, stable instrument equipment rack for ADCP measurements with the TRDI StreamPro (with or without compass upgrade)Best suited for slow and fast water flow up to 3.6 m/s

Teledyne Oceanscience Riverboat SP™

Teledyne RD Instruments RiverPro ADCP

1200 kHz broadband ADCP sensor incl. equipment rack (trimaran) for mobile flow measurementMoving boat method600 kHz sonar for bottom trackingIntegrated GPS for georeferencingAutomatic cell resizing and sensor parametrisationWireless communication via Bluetooth transmission to a tablet PC or a notebook

Teledyne RD Instruments RiverPro ADCP

Teledyne RD Instruments RiverRay ADCP

600 kHz broadband ADCP sensor incl. equipment rack (trimaran) for mobile flow measurementMoving boat methodSonar for bottom trackingAutomatic cell resizing and sensor configurationWireless communication via Bluetooth transmission to a tablet PC or notebook

Teledyne RD Instruments RiverRay ADCP

Teledyne RD Instruments StreamPro ADCP

2 MHz broadband ADCP sensor incl. equipment rack for mobile flow measurementMoving boat methodFast and accurate throughput measurementsWireless communication via Bluetooth transmission to a tablet PC or notebook

Teledyne RD Instruments StreamPro ADCP

Teledyne RD Instruments ChannelMaster

Accurate: Teledyne RDI Broadband technology allows for
small cells and/or short averaging sampling intervals, thus increasing
your data accuracy. Robust: Collect highly accurate velocities even in difficult environments such as slow flow or rapidly changing flow. Versatile:
ChannelMaster offers a range of 1-128 user-selectable cell sizes from
25 cm - 8 m and profiling ranges from 1 m - 300 m (frequency dependent). Sturdy: Comes standard with stainless steel mounting fixture. SDI-12 interface for connection to existing data loggers or remote data transmission systems

Teledyne RD Instruments ChannelMaster

RDT module SlimCom IoT LR

Remote data transmission via LoRaWAN™ technologyThe
option to connect (modular system) SEBA data collectors with sensors
for measuring water level, water temperature and conductivityLong battery lifeSlim design (installation starts from a pipe diameter of 2“)Suitable for above- and below-ground monitoring stationsExisting SEBA data collectors (Dipper-PT/Dipper-PTEC) can be easily retrofittedHighly reliable in operation thanks to redundant energy supply andXXL buffer storage


RDT module SlimCom IoT LR

Precipitation Sensor TRW tipping-scale principle

Robust precipitation sensor operating according to the  tipping-scale principleHigh measurement accuracy for all types of precipitation (drizzle, heavy rain, sleet, snow etc.)Heating ring to prevent ice formation or snow capsWMO-CompliantWindscreen for exposed locations (optional)

Precipitation Sensor TRW tipping-scale principle

Precipitation Sensor RG 100 tilting scales

Precipitation sensor with tilting scales and pulse output (1 pulse = 0.1 l /m²)Robust, lockable, cast aluminum housing to protect against unauthorised access15 watt hopper heating for defrosting of solid precipitates (optional)Interior heating for winter operation (optional)

Precipitation Sensor RG 100 tilting scales

Precipitation Sensor RG 50 tilting scales

Compact precipitation sensor with the tilting scales and pulse output (1 pulse = 0.1 l /m²)15 watt funnel defroster to remove solid precipitates (optional)Mounting on a 2" mounting column or a cantilever

Precipitation Sensor RG 50 tilting scales

Automatic Weather Station AWS

WMO CompliantRobust weather station consisting of
meteorological sensors, SEBA measuring data collector, data transmission
(optional), independent power supply, protective housing and a mastSensors:
precipitation, air pressure, air temperature /humidity, wind direction
/speed, soil temperature, global radiation, evaporation, snow depth,
snow scales, snow temperature, etc.

Automatic Weather Station AWS

SEBA KLL-S Sampler

Mechanically lockable sampler with 0.5 or 1 liter capacity for 2"or 4" groundwater monitoring pointsConnects to SEBA electric contact gauges KLL type (electric water level gauge)Easily disassembled and cleaned

SEBA KLL-S Sampler

SEBA Checker-2

Mobile, compact field laboratory for measuring water quality
parameters (e.g. oxygen, pH, conductivity, redox potential, turbidity)
in surface watersSpiral cable with stainless steel coupling for SEBA multi-parameter probes of the MPS-D3/D8/K163-line backlit LCDIntegrated logger for manual and / or automatic storage of measured values ??(optional)

SEBA Checker-2

Electric Contact Meter Type KLL-Q-2

Mobile field laboratory with electric cable contact gauge for
measuring the water level, temperature and other water quality
parameters (e.g. oxygen, pH, conductivity, redox potential, turbidity)
in groundwater and surface watersSEBA Plug-in System for coupling with SEBA multiparameter sondes of the MPS-D3/D8/K16Printed tubular cable with cm/dm/m-scaling, available from 30 m to max. 400 m in length3-line backlit LCD displayIntegrated logger for manual and / or automatic storage of measured values ??(optional)

Electric Contact Meter Type KLL-Q-2

Multi-parameter probe MPS-D8/Qualilog8

Robust, pluggable multi-parameter sensor from 1.4439 stainless
steel to accommodate up to eight sensors (water level, temperature,
conductivity, pH, redox potential, oxygen, turbidity, etc.)Additional electric contact gauge function combined with KLL-Q-2 mobile field laboratorySlim design (Ø 48mm, 493 mm length), can be used with 2" and larger pipe diametersOutput: RS485 (SHWP), Option: MODBUS, SDI-12, 0/4-20 mAOptional: Integrated, powerful SEBA data logger Qualilog8 for stationary use

Multi-parameter probe MPS-D8/Qualilog8

Multi-parameter probe MPS-K16/Qualilog16

Robust, pluggable multi-parameter sensor made of plastic
(PVC-U) for mounting up to twelve sensors (water level, temperature,
conductivity, pH, redox potential, oxygen, turbidity, ammonia, nitrate,
chloride, ammonium, sodium, calcium, fluoride, potassium, chlorophyll or
cyano-bacteria-rhodamine WT)Additional electric contact gauge function combined with KLL-Q-2 mobile field laboratoryOptimised design (Ø 89 mm, 572 mm length), usable starting from a 4"-diameter pipeOutput: RS485 (SHWP), Option: MODBUS, SDI-12, 0/4-20 mAOptional: integrated, high-performance SEBA data logger Qualilog16 (for stationary use)

Multi-parameter probe MPS-K16/Qualilog16

Multi-parameter probe MPS-PTEC

Multi-parameter sensor for detecting pressure, temperature and conductivityHigh-quality 4-electrode conductivity measuring cellCeramic-capacitive pressure sensor with high measuring accuracy (0.05% FS) and long-term stability (0.1%/year)Robust, sleek Ø 22 mm grade 1.4539 stainless-steel housing for extreme conditions Output: RS485, Option: MOD-BUS, SDI-12, 4-20 mAOptional with integrated data logger: variant "Dipper-PTEC"

Multi-parameter probe MPS-PTEC

Multi-parameter probe MPS-D3

Robust, pluggable multi-parameter sensor of 1.4404 stainless steel, accommodating up to three sensorsAdditional electric contact gauge cable combined with KLL-Q-2 mobile field laboratorySlim design (40 mm diameter, 400 mm length), can be used with 1.5" and larger pipe diametersOutput: RS485 (SHWP), Optional: MODBUS, SDI-12, 0/4-20 mA

Multi-parameter probe MPS-D3

Software Q 4

Standard software (Windows) of the German Federal Institute of
Hydrology (Bundesanstalt für Gewässerkunde, BfG) and the Water and
Shipping Authorities for Evaluation of Mobile Flow Measurement in
accordance with ISO748 and Gauging Regulations, Annex DRelational database management system (SQL interface, easy data search and data backup, redundancy-free storage)Data management for measuring instruments (e.g. M1 Mini vanes, Universal Wing F1, HydroProfiler-M, HydroProfiler M-Pro) and calibration equationsCreation of measurement reportsSupported measurement methods: single-point measurement, two-point measurement, multi-point measurementModularly expandable (Pro-module, module vane, module HydroProfile etc.)

Software Q 4

Z6 counting device

Robust, compact counting device for detecting impeller pulsesTime preset and/or pulse preselect (optional)Display of flow rate (optional)5-digit LCDAutomatic battery monitoring

Z6 counting device

SEBA Bridge cantilever

Bridge cantilever made of aluminum for mobile flow measurement with SEBA single winch type SEWII and water impellor equipment 5 kg-50 kgTransport dimensions: 130x54x30 cmAdaptable to different widths of bridge railing

SEBA Bridge cantilever

Basic winch SEWII

Portable mechanical winch for mobile flow measurement with hydrological impellors (e.g. SEBA water wings F1)Adapted to different cantilever systems (bridge cantilevers, measuring trailers etc.)High-performance 24V motor in combination with a comfortable operating terminal (optional)Suitable for load weights of 5 kg -100 kg

Basic winch SEWII

SEBA cable crane system

LAWA-guidelines-compliant and robust stationary cable crane
system for water impellor equipment with ballast weights of up to 100 kgHigh-performance
double winch type SDW-ES with a steplessly adjustable 1.5 kW, 230 VAC
electric motor for adjusting speeds of 0-0.5 m/s and electrically
switchable coupling (SDW-ESM)Comfortable, external operator terminal in two different versions (e.g. with an integrated counting device)Optionally
available with clamped circuit tension (SKA-S), hydraulic pretension
(SKA-H) or weighted tension (SKA-G) of the suspension cable and shift
cable

SEBA cable crane system

Hydrovision AquaProfiler®MT Horizontal ADCP

High-performance, optimised measurement system for stationary flow measurement in flowing waters consisting of measurement transducer type MT and 2D AquaProfiler® doppler sensor<!---->

Hydrovision AquaProfiler®MT Horizontal ADCP

Hydrovision Kanalis TT MT Ultrasonic transit time

High-performance, optimised measurement system for stationary flow measurement in watercourses (ultrasonic travel-time differential method) consisting of an MT type measurement transducer and acoustic 200 kHz converters of the TD200/8 or TD200/18 types to max. 10 m of the waters width<!---->

Hydrovision Kanalis TT MT Ultrasonic transit time

No products published

Hydrovision Q-Eye Radar MT radar doppler

Cost-effective measuring system for stationary flow measurement in streams, rivers and channels, consisting of type MT measurement transducer and a contactless RV Radar Doppler Sensor<!---->

Hydrovision Q-Eye Radar MT radar doppler

Hydrovision Q-Eye MIII Ultrasound doppler

Mobile, battery-operated measuring system for stationary flow measurements in partially filled or filled pipes and open channels; Large 4 MB ring memory for 280,000 measurements

 <!---->

Hydrovision Q-Eye MIII Ultrasound doppler

Hydrovision Q-Eye PSC MT Ultrasound doppler profiler

Cost-effective, optimised measurement system for stationary flow measurement in small, defined measuring sections (channels, streams, pipes) consisting of a MT type measurement transducer and a PSC Pulse Doppler combined sensor<!---->

Hydrovision Q-Eye PSC MT Ultrasound doppler profiler

LogCom-Q/UniLogCom-Q

Robust, compact, multi-channel data logger
with an integrated cellular modem optimised for continuous flow
measurement in small channels, streams and partially filled pipes.Available
in various formats LogCom-Q with an impact-resistant aluminum
protective housing, suspended battery compartment and a threaded
connection for monitoting well pipes of 4" diameter and UnilogCom-Q for
installation in existing protective housings / switch cabinetsBacklit LCD with three multi-function buttons to display current measured values ??and system statusVertically or horizontally insertable, 1.04 MHz pulse-doppler-sensor for detecting flow velocity profiles in max. 18 cellsintegrated ultrasonic sensor for precise measurement of water level (0.1% FS) up to 1.3 mTransfer Options: Data retrieval via mobile network, FTP Push, TCP push, SMS push, SMS AlarmsConnection options for additional sensors (e.g. SEBA pressure probe DS 22)

LogCom-Q/UniLogCom-Q

HydroProfiler M-Pro

Mobile ADCP measuring device for measuring the flow using a Ø 20mm wing rodPerpendicular procedure (profile measurement)2-D Doppler, 2 MHz speed sensorIntegrated water level and temperature measurementFlow calculation according to EN ISO 784

HydroProfiler M-Pro

HydroProfiler-M

Acoustic Doppler sensor for mobile flow measurement on a Ø 20 mm wing barPoint measurement method (detection of point velocities in the measuring verticals)1-D Doppler, 6 MHz speed sensorIntegrated pressure and temperature sensorFlow calculation according to EN ISO 784

HydroProfiler-M

SEBA FlowSens

Portable measuring instrument with a magnetic inductive flow sensor for mobile flow measurement on a Ø 20mm wing rodPoint measuring method (detection of point velocities in the measuring verticals)Battery-powered handheld terminal with a large LCD and operated by keypadFlowFlat sensor for use from 5 cm water level (optional)

SEBA FlowSens

M1 Mini current meter

Hydrological current meter for flow measurement on a Ø 9 mm or Ø 20 mm rodPoint measuring method (detection of point velocities in measuring verticals)Six different aluminum impeller blades for different applications are availableConnects to Counting device Z6 or to a notebook or tablet PC HDA-Pro operated with Software Q 3.1 and the "impeller" module

M1 Mini current meter

Universal Current Meter F1

Robust, hydrological impeller for flow measurement on a Ø 20 mm rod or on a load weight (float wings)Point measuring method (detection point velocities in the measuring verticals)Suitable for measurements in watercourses with low to high flow ratesDifferent wing vanes available for different applicationsConnects to Counting device Z6 or to a notebook or tablet PC HDA-Pro, operated with Software Q 3.1 and "impeller" module

Universal Current Meter F1

DischargeKeeper

Camera-based measurement system for acquisition of the surface velocity profile and water levelDirect calculation of the dischargeNon-intrusive measurement method using only one sensor (camera)Data storage and remote transmission of measurement data and imagesIntelligent alarm management

DischargeKeeper

SEBA staff gauges

Staff gauges made of robust cast aluminum with raised 2 cm
"E-scale" graduation (1 cm "E-scale" graduation as an option is
possible)Measuring range: 0-12 m (standard) in 1 meter sectionsScaling and figuring in cm or AMSL (above mean sea level) , black on yellowCoating made of shock and weather-proof special lacquerAvailable finishes: Plumb line-staff gauge, inclined staff gauges, staircase level

SEBA staff gauges

Data Transmission via the IRIDIUM Satellite

Robust satellite modem for global and nation-wide data transfer (incl. polar regions)Direct connection to SEBA measurement data collector Unilog

Data Transmission via the IRIDIUM Satellite

SEBA ModCom

External mobile modem with radio standard for connection to SEBA measurement data collectors type Unilog and Unilog-LightCompact and robust design, designed for use in all climate zonesSMA interface for the connection of different antenna typesTransmission options: GPRS retrieval, FTP push, TCP push, SMS push, SMS alert

SEBA ModCom

No products published

Radar Sensor Type SEBAPuls 8/15/30/120

Radar sensors for non-contact level measurement in flowing waters, lakes, reservoirs and retention basinsMeasurement ranges and accuracy: 0-8 m (± 5 mm), 0-15 m (± 2 mm), 0-30 m (± 2 mm), 0-120 m (± 5 mm)Protection class IP66/68Mounting on bridges, outriggers, piers and walkways

Radar Sensor Type SEBAPuls 8/15/30/120

LevelSense shaft encoder

User-friendly shaft encoder for precise detection of water level fluctuations with a float and counterweightMeasuring range: 0-15 m with a ball chain or 0-100 m with float ropeMeasuring accuracy: 2.5 mm (depending on the size of the float)3-line display of the current measured valuesOutput signals: RS485 (SHWP), SDI-12, MODBUS, 0/4-20 mAInternal 9V back-up batteryOptionally with integrated data logger: UniLog Light ENC

LevelSense shaft encoder

Surfloat Sensor 4

More affordable angle encoders for precise detection of water level fluctuations with float and counterweightMeasuring range: 0-15 m with a ball chain or 0-100 m with float ropeMeasuring accuracy: 2.5 mm (depending on the size of the float)Adaptable to mechanical registration level of the type SEBA Delta and XI levelConnectivity to SEBA measurement data collector UniLog-Light, Unilog, UniLogCom

Surfloat Sensor 4

Pneumatic Gauge PS-Sensor

Continuous bubbler sensor for fast detection of water level changesautomatic pressure range detection for maximum measuring accuracy (0.05% FS)Display with function keys for measured value indicationMeasuring ranges: 0-10/17/20/30/35/40 mLong-term stability due to intelligent sensor drift compensationAvailable with digital (RS485: SHWP, SDI-12, MODBUS) or analog output (4-20mA, 0-1V, 0-5V)Various configuration possibilities, e.g. number of bubbles per minute, measuring cycles, etc.Including automatic blow-through, compressor and air reservoir (0.75 l)

Pneumatic Gauge PS-Sensor

No products published

Pressure sensor pneumatic gauge PS-Light-2

Compact, robust measurement system for measurement of water level using the „bubble gauge“ principleMaintenance-free – No pumb lubricant or moisture absorber neededHigh accuracy (0.05 % FS) and long-term stability through smart sensor drift compensationMeasuring ranges: 0-10 m (standard), Option:0-20 m, 0-40 mLow energy consumption through optimised pump controlWide
range of output signals 0-1 V, 0-5 V, 0/4-20 mA, RS 485 (SDI-12, SHWP)
for uncomplicated connection to external data collectors or to process
control systems (SPS)Easy installation on the existing water level stations, protective housing or control cabinetsOptionally available with integrated data loggerOptionally available with integrated data logger and modem for remote data-transmission (4G/LTE)

Pressure sensor pneumatic gauge PS-Light-2

Data Logger Unilog-Light

More affordable 1-2-channel data logger in pocket format Robust, weather-proof housing with LCD and three multifunction buttons Variant-specific connectivity of analog and digital sensors: Precipitation measurement with RG50/RG100/TWR: Unilog-Light-RLevel measurement with float/counterweight: Unilog-Light-ENCLevel measurement with SEBA-pressure probe DS 22: Unilog-Light SHWPWater quality measurement with SEBA multiparameter sensors MPS-D8/K16: Unilog-Light SHWPVarious measuring tasks with analog sensors: Unilog Light AnalogVarious measuring tasks with SDI-12 sensors: Unilog Light SDI-12 Large ring memory capacity of 1,120,000 readings Connectivity for external GSM/GPRS modem type ModCom

Data Logger Unilog-Light

Data Logger Unilog

Wide-ranging applications, high capacity data collector with a total of 32 logical channels16 MB ring memory for 1,120,000 measurementsCompact plastic housing for wall mountingBacklit LCD with three multi-function buttons to display current measured values ??and system statesConfigurable analog and digital input channels to connect up to 32 sensorsMini USB for data transfer (optional)Connectivity for external GSM/GPRS modem type ModCom, Iridium satellite modem type etc.

Data Logger Unilog

SEBA BlueCon 2

Wireless communication between readout unit (smartphone, tablet) and SEBA data collector using Bluetooth® wireless technologyInternal rechargeable battery with a USB chargerAvailable with RS232 and RS485 interface for both online and offline systems

SEBA BlueCon 2

SEBA HDA-Pro

Robust 10.1" tablet PC with Windows 10 Operating SystemProtection class IP651 x RS232 interface, 2 x USB, VGA, LAN, MicroSD Slot, LoudspeakerIntegrated GPS, 5 megapixel camera, Bluetooth®, WWAN (Optional)

SEBA HDA-Pro

SEBA HDA-Tablet

Operating system AndroidReplaceable battery for a long operation (optional)Digital text marker (S-Pen) – comfortable and precise handlingProtective cover – drop protection from heights up to 1.5 meters Dust and water repellentSEBAConfigApp inclusive – regular updates via Playstore

SEBA HDA-Tablet

Software DEMASole

Convenient software (Windows) for automatic retrieval data from remote data transmission stationsAutomatic
conversion and deployment of the read-out measurement data in any
destination directory for further processing with the software DEMASdb or for forwarding to the existing process control systems (PCS)Automatic logging (log book) of all activities for analytical purposes

Software DEMASole

Software SEBA Hydrocenter

Web portal for a password-protected provision of time series on the InternetData visualisation in the form of hydrographs and listsData download of any time series in ASCII-& csv formatIndividual configuration (monitoring stations, sensors, calculating sensors etc.) according to customer specificationsNo annual licence fees (Hydrocenter)Status
indicator (traffic light function) of the remote data transmission
stations in the monitoring station Explorer (Hydrocenter-Pro)Positioning of the monitoring stations via GPS coordinates on an open-street map (Hydrocenter-Pro)

Software SEBA Hydrocenter

Software DEMASdb

Data management software (Windows) to manage and archive large amounts of dataParadox database (default), Oracle, MySQL, SAP (option)Automatically import of (logger) time seriesAvailable as single and multi-workstation versionAutomatic calculations based on mathematical formulas or table picturesUser Management to protect against unauthorised accessExport of time series in different file formats (e.g. ASCII, csv, txt, ZRXP)Graphical and tabular time series visualisation DEMASvis

Software DEMASdb

Software DEMASvis

Evaluation software (Windows) for graphical or tabular display
of the measured values is available as a single workstation version
(stand-alone) or as a part of software DEMASdb and ConfigPCModern user interface with graphical operating concept (Ribbons)Hydrographs with zoom and crosslines functionCalculation functions (e.g. averaging, extreme value calculation, summation etc.)Hydrograph correction over control values, sensor drift compensation, interpolationLive mode for KLL-Q-2-users, for visualising current data, for example in connection with HDA-ProExport of data in different formats (e.g. csv-/.txt-File and ASCII-Format)(eg.ASCII, CSV)

Software DEMASvis

SEBA ConfigAPP

Operating software (Android, iOS) for programming, adjustment and data read-out of SEBA loggers in conjunction with SEBA  BlueCon 2Data visualisation of time-series in hydrograph form

SEBA ConfigAPP

Software ConfigPC

Operating software (Windows) for programming, calibration and
data read-out of SEBA loggers and for the calibration of SEBA-pressure
and multi-parameter sensorsData visualisation of read-out time series in graphic form (hydrographs with DEMASvis)

Software ConfigPC

Artesian Cap

Pressure-tight closure of temporary or permanent artesian groundwater monitoring wells

Artesian Cap

The Original SEBA Cap

Anti-vandalism closure of groundwater monitoring wells from 1.5"- 6" pipe diameterSpecial alloy of cast aluminum for high corrosion and weather resistance even in frostAvailable in two closure variants (normal / safety lock)Sealing insert for flood-prone ground water measuring points (optional)

The Original SEBA Cap

TLG - Depth-sounding device

Portable hand-held device for determining the water level and for depth sounding up to 200 m Fine mechanical, fully automatic measurement proceduresMechanical counter to display the groundwater level in m and cmLight weight and compact design

TLG - Depth-sounding device

Electric Contact Meter Type KLL-T

Portable hand-held device for determining the current water
level and the water temperature in water depths up to 500 m and sounding
pipes from Ø 1"Membrane keypad with backlit LCD to display temperature Optical and acoustic signal on contact with waterRobust aluminum support frame

Electric Contact Meter Type KLL-T

Electric Contact Meter Type KLL-Mini

Mobile Pocket handset to determine the water level to a depth of 15m in monitoring wells from Ø 1"Optical and acoustic signal upon contact with waterExtendable functionality (basic button, saltwater probe cap etc.)

Electric Contact Meter Type KLL-Mini

Electric Contact Meter Type KLL-Light

Affordable, portable hand-held device for determining the current water level to a depth of 200 metersOptical and acoustic signal on contact with waterLED battery status indicatorRobust support frame with a handle made of polycarbonate

Electric Contact Meter Type KLL-Light

Electric Contact Meter Type KLL

Portable hand-held device for determining the current water level up to 500 meters depthOptical and acoustic signal (option) on contact with waterAvailable on hand drum or with a robust aluminum support frameExtensible scope of functionality (basic sensing device, sampling, electric drive, etc.)

Electric Contact Meter Type KLL

Pressure probe DS(T) 22

Capacitive, ceramic, relative-pressure sensor for precise water level measurement in ground and surface waterRobust and slim design (22 mm diameter) made of stainless steel 1.4404 (standard), 1.4539 (optional)High measuring accuracy (0.05% FS) and long-term stability (0.1%/year)Wide availability of measuring ranges (0-2 /1 /4 /5 /20 /40 /100 /200/250 /300 m)digital (RS485: SDI-12, Modbus, SHWP) or analog output (4-20mA)Optional: Integrated temperature sensor (type DST 22)

Pressure probe DS(T) 22

Data Logger SlimLogCom

Compact multi-channel data logger with an integrated cellular modem optimised for use in level tubes from Ø 2"Large 16 MB ring memory for 1.120.000 measurementsAutonomous power supply with standard C-size or lithium batteriesTransfer Options: Data retrieval via mobile network, FTP Push, TCP push, SMS push, SMS AlarmsConnectivity with various digital SEBA sensors, e.g. DS(T) 22 pressure sensor , MPS-PTEC / MPS-D8 multi-parameter sensors in combination with various types of antennas

Data Logger SlimLogCom

Data Logger LogCom/FlashCom

Robust, compact multi-channel data logger with an integrated cellular modemImpact-resistant aluminum housing with threaded connector, optimised for level tubes of 4 " diameterEither with an external battery or integrated solar module (type FlashCom)LCD with three multi-function buttons to display current measured values ??and system statusTransfer Options: Data retrieval via mobile network, FTP Push, TCP push, SMS push, SMS AlarmsCan be connection to DS(T) 22, MPS-PTEC/D8/K16 and other external sensors

Data Logger LogCom/FlashCom

RDT module SlimCom

Remote data transmission module with an integrated cellular modem optimised for connecting Dipper- (A)PT and Dipper-PTECSleek aluminum housing for installation in level tubes from 2" pipe diameterAutonomous power supply with standard C-size batteriesTransfer Options: Data retrieval via mobile networkretrieve via mobile data, FTP Push, TCP push, SMS push, SMS AlarmsPossibility of connecting different types of antennas

RDT module SlimCom

Data Logger Baro-Dipper

Measuring data collector with Baro sensor optimised for precise detection of atmospheric pressureRobust, Ø 22 mm slim stainless-steel case16 MB memory for approximately 1.120.000 readingsReplaceable lithium batteries for about 3-4 years service lifeOperation with notebook, tablet, PC, smartphone or tablet via Bluetooth (optional)Use in conjunction with Dipper-APT for atmospheric pressure compensationExpandable with data transmission module SlimCom

Data Logger Baro-Dipper

Data Logger Dipper-APT Absolute Pressure

High-performance 32 bit measurement data
collector with an absolute pressure sensor for measuring points prone to
over-flooding and for swelling pressure measurements at great depthsPrecise,
long-life, stable ceramic-capacitive absolute pressure sensor, for
measuring ranges up to max. 20 bar, NTC30 temperature sensor with an 0.3
°C (standard) or 0.1 °C (optional) accuracySturdy, sleek Ø 22 mm stainless-steel caseXL ring memory for approximately 1.120.000 measurement dataReplaceable lithium batteries for about 8-10 years service lifeOperation with notebook, tablet, PC, smartphone or tablet via Bluetooth (optional)Air pressure compensation with additional Baro-Dipper and Software DEMASdbExpandable with data transmission module SlimCom

Data Logger Dipper-APT Absolute Pressure

Data Logger Dipper-PTEC

High-performance 32 bit measurement data
collector optimised for water level, temperature and conductivity
measurement in ground and surface watersXL ring memory for approximately 1.120.000 measurement dataSturdy, sleek Ø22 mm stainless-steel housing for extreme conditionsHigh-quality 4-electrode conductivity measuring cellAccurate, long-term, stable, ceramic-capacitive pressure sensorNTC30 temperature sensor with 0.1°C accuracyExternal power pack module with interchangeable 1.5V size C batteriesOperation with notebook, tablet, PC, smartphone or tablet via Bluetooth® (optional)Expandable with data transmission module SlimCom

Data Logger Dipper-PTEC

Data Logger Dipper-PT Relative Pressure

High-performance 32 bit measurement data
collector optimised for water-level and temperature monitoring in ground
and surface watersXL ring memory for approximately 1,120,000 measurement dataSturdy, sleek Ø 22 mm stainless-steel caseAccurate, long-term stable ceramic-capacitive pressure sensor of a max. 300 m measurement rangeNTC30 temperature sensor with 0.3 °C (standard) or 0.1 °C (option) accuracyReplaceable lithium batteries for about 8-10 years service lifeOperation with notebook, tablet, PC, smartphone or tablet via Bluetooth® (optional)Expandable with data transmission module SlimCom

Data Logger Dipper-PT Relative Pressure

Data Logger UnilogCom

Wide-ranging applications, high capacity, multi-channel data logger with integrated cellular modemLarge 16 MB ring memory for 1,120,000 measurementsCompact plastic housing for wall mountingLCD with three multi-function buttons to display current measured values ??and system stateTransfer Options: mobile data retrieval, FTP Push, TCP push, SMS push, SMS AlarmsConnectivity to digital and analog probes

Data Logger UnilogCom

Data Logger NetLogCom

High-Performance Data logger with a total of 100 configurable analogue and digital input channels2 GB SD Flashcard for approximately 50 Million measurementsCompact, aesthetic plastic casing for wall mountingLarge 320 x 240 (3,5") TFT-Color-Display with membrane keypad for easy configuration and operation of the NetLogComDisplay of time series in graphical form (hydrograph, list)Integrated measurement and error reporting system including speaker.Integrated 4G ModemVoice-Over IP (VoIP)Voice messaging and push operation via different networksInterface: Ethernet (TCP-IP), 2x RS 232, 2x RS 485, SDI-12, USB-M, USB-SIP-Communications: FTP, SFTP, HTTP, HTTPSBoth network adapters can be used simultaneously (routing)

Data Logger NetLogCom